Install

Attaching the Stem to the Base

  1. The stem cam lock head comes with factory settings that can be adjusted by removing the two bolts on the sides using a 3/16th Allen Key.
  2. There is also a leveling bubble that comes preset from the factory.
  3. The bottom of the stem comes with four (4) leveling bolts that should be flush with the bottom of the base.

    note… When installing on an uneven surface, screw the bolts until you see the leveling bubble at its median point.

  4. Use the 4 bolts supplied to fasten down the stem to the frame.
  5. Use the bottom hub to push the umbrella open completely.
  6. Once opened, insert the security pin through the mast.
Tools needed
None
More in Ocean Master Max Cantilever See all
Tutorial

360 Rotation and Cam Lock
Install

Attaching the Cable
Open & Close

Closing a Cantilever Parasol
Open & Close

Opening a Cantilever Parasol

Need a hand? Talk to your Tuuci rep